Vivotek Progressive Scan CCD PoE Network Camera Guide d'installation télécharger pdf (Page 90)

- 89 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

enable 0, 1 6/6 To enable or disable this event.

priority 0, 1, 2 6/6 Indicate the priority of this event.

“0” indicates low priority.

“1” indicates normal priority.

“2” indicates high priority.

delay 1~999 6/6 Delay seconds before detect next

event.

trigger boot,

di,

motion,

seq,

6/6 Indicate the trigger condition.

“boot” indicates system boot.

“di” indicates digital input.

“motion”

indicates video motion

detection.

“seq” indicates periodic condition.

di <integer> 6/6 Indicate which di detected.

his field is required when trigger

condition is “di”.

One bit represents one digital input.

The LSB indicates DI 0.

mdwin <integer> 6/6 Indicate which

motion detection

windows detected.

his field is required when trigger

condition is “md”.

One bit represents one window.

The LSB indicates the 1

window.

For example, to detect the 1

and 3

windows, set mdwin as 5.

inter 1~999 6/6 Interval of period snapshot in minute.

his field is used when trigger

condition is “seq”.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 105 106

Pas de commentaire

Vivotek Progressive Scan CCD PoE Network Camera Guide d'installation Page 90