Vivotek Progressive Scan CCD PoE Network Camera Guide d'installation télécharger pdf (Page 45)

- 44 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

CCD Settings

Click on “CCD Settings” button, the CCD settings window will pop up.

“IRIS level” let users to adjust the aperture size of your auto iris lens.

“AGC” - automatic gain control, enable this to do MAX AGC, otherwise NORMAL AGC

is done.

“AES” - auto electronic shutter, enable this will let CCD sensor adjust electronic

shutter automatically. Disable this when auto iris lens is attached.

“BLC” - back light compensation, enable this will help to identify objects in front of

light source.

“IR cut filter” - When set to “Night mode”, the camera will be able to “see” infrared

light, it increases light sensitivity. Set to “Auto” to automatically turn the filter off when

the available visible light falls below the minimum requirement. In “Schedule mode”,

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 105 106

Pas de commentaire

Vivotek Progressive Scan CCD PoE Network Camera Guide d'installation Page 45