Vivotek FE8172 Guide d'installation

Quick Installation GuideVIVOTEK INC.6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.|T: +886-2-82455282| F: +886-2-82455532|

EN - 9English1. Install “Installation Wizard 2” from the Software Utility directory on the software CD.2. The program will conduct an analysis of yo

Quick Installation GuideVIVOTEK INC.6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.|T: +886-2-82455282| F: +886-2-82455532|

EN - 1EnglishWarning Before InstallationPower off the Network Camera as soon as smoke or unusual odors are detected.Do not place the Network Camera on

EN - 2Physical Description2Inner ViewHeader (J7)Spring Contacts (A)LensContacts for Internal Microphone (B)Header (J6)Ethernet 10/100 RJ45 SocketMicro

EN - 3EnglishOuter ViewBuilt-in MicrophoneDome CoverIMPORTANT:Record the MAC address under the camera base before installing the camera.Hardware Insta

EN - 4Connect the supplied power & IO cables if your switch does not support PoE. Connect the white header connectors to J6 and J7 on the camera.

EN - 5EnglishDrill holeDrill holeDrill holeDrill holeDrill holeDrill holeCeiling or Wall Mount12341. Attach the supplied alignment sticker for the ca

EN - 6Install the plastic dome cover by aligning the snap-t tabs on the dome cover with the slotted tabs on the camera base. Install the dome cover b

EN - 7English1. Connect RJ45 Ethernet cable to a switch. 2. Connect the power cable from the Network Camera to a power outlet.3. If you have external

EN - 8Use a PoE power injector (optional) to connect between the Network Camera and a non-PoE switch.When using a non-PoE switchPower over Ethernet (P