Vivotek Progressive Scan CCD PoE Network Camera Guide d'installation télécharger pdf (Page 50)

- 49 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

If there is any PTZ camera attached, users should select the“RS485 Settings” as

“PTZ camera”. Users have to configure the camera id, PTZ driver, and ports settings

correctly. The ID is specific to the camera and necessary for multiple camera control.

Please refer to the PTZ camera’s user manual for ID settings. The network camera has

three built-in PTZ camera drivers, including DynaDome/SmartDOME, Lilin PIH-7x00,

and Pelco D protocol. For user’s convenience, users can upload their alternative PTZ

driver to the Video Server. Please refer to the maintenance page for more information

about how to upload your PTZ driver file.

Note that the Network Camera can support multiple protocols to PTZ cameras. If there

are PTZ camera functions can’t work, please see your PTZ camera’s user manual to

check if your camera supports these functions.

Camera control panel doesn’t

show up in `Fixed Camera’ mode

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 105 106

Pas de commentaire

Vivotek Progressive Scan CCD PoE Network Camera Guide d'installation Page 50