Vivotek IP3111/IP3121 Manuel d'utilisateur télécharger pdf (Page 76)

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Send command to device attached to COM

/cgi-bin/senddata.cgi?data=123456,ABCDEF&flush=yes&wait=1000&read=6

This hyperlink will inform NetworKam to send out binary format commands to the COM with “0x12,

0x34, 0x56” followed by “0xAB, 0xCD, 0xEF”. Each comma separates the commands by 200

milliseconds. “flush=yes” means the receive data buffer of COM port must be cleared before read. Then

read 6 bytes after waiting for 1000 milliseconds. The read data can be up to 128 bytes and will return as

ASCII coded hexadecimal value, e.g., 0x41, 0x42, 0x43 read from COM port will show in returned

homepage as 414243 instead of ABC.

Restore factory default settings

/setup/restore.cgi

NetworKam will automatically restart after restoring factory default configurations.

Restart system

/setup/reset.cgi

Restart NetworKam without warning.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 89 90

Pas de commentaire

Vivotek IP3111/IP3121 Manuel d'utilisateur Page 76