Vivotek PZ7132 Guide d'installation télécharger pdf (Page 11)

EN - 10

Note:

1. SSID, abbreviated from Service Set Identiﬁer, is the name assigned to the wireless

network. The PZ7132's factory SSID setting is set to "default".

2. Select "Ad-Hoc" wireless mode if you want the PZ7132 to communicate without

using an AP or wireless router.

POWER

COL

LISION

LINK

RECEIVE

PARTITION

ADSL/Cable/Hub

For further setup, please refer to user's manual on the software CD.

Conﬁgure the Wireless Connection

(PZ7132 only)

1. Check the SSID currently set on your wireless access point (AP).

2. Go to PZ7132's Conﬁguration > Advanced mode > Wireless.

3. Type in the SSID consistent with the setting on your AP.

4. Select the Wireless mode as "Infrastructure".

5. Click Save. The Network Camera starts to reboot.

PZ7132

6. Wait for the live image is reloaded to your browser. Then, unplug the power cable

and Ethernet cable from the Network Camera.

7. Replug the power cable to the camera. The Network Camera now operates in

wireless mode.

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Vivotek PZ7132 Guide d'installation Page 11