Vivotek MD7560D Spécifications télécharger pdf (Page 12)

VIVOTEK

12 - User's Manual

Fine-tune the Camera Focus

The focus of this network camera is set from 1.0m to innity by factory default. If you want to

focus on objects closer than 1.0m or the lens has lost focus, please ne tune it in the following

way�

1� Loosen the lens lock screw�

2. Manually rotate the lens to ne-tune the focus until the live image is clear.

3� Tighten the lens lock screw�

Completion

Tear down the aluminum foil vacuum bag and take out the silica gel� Attach the supplied silica

gel to the inner side of the Network Camera� (Please replace the silica gel with a new one if you

open the back cover after installation�)

Attach the dome cover to camera� Secure the dome screws with the supplied screwdriver�

Finally, make sure all parts of the camera are securely installed�

Tighten the lens lock screw�

Please secure the screws tightly

to avoid moisture�

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 82 83

Pas de commentaire

Vivotek MD7560D Spécifications Page 12