Vivotek IP8331 Spécifications télécharger pdf (Page 5)

VIVOTEK

User's Manual - 5

General I/O Terminal Block

This Network Camera provides a general I/O terminal block which is used to connect external

input / output devices. The pin denitions are described below.

Hardware Reset

The reset button is used to reset the system or restore the factory default settings� Sometimes

resetting the system can return the camera to normal operation� If the system problems remain

after reset, restore the factory settings and install again�

Reset: Press and release the recessed reset button with a paper clip or thin object� Wait for the

Network Camera to reboot�

Restore: Press and hold the recessed reset button until the status LED rapidly blinks� Note that

all settings will be restored to factory default� Upon successful restore, the status LED will blink

green and red during normal operation�

AC24V: 24V+

AC24V: 24V-

DI : Digital Input

GND : Ground

AC24V

GND

Reset Button

Status LED

1 2 3 4 5 6 7 8 9 10 ... 127 128

Pas de commentaire

Vivotek IP8331 Spécifications Page 5