Vivotek TC5633 Guide d'installation télécharger pdf (Page 62)

- 61 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.

Condition LED color

Loading system after power on Steady red

During booting procedure Steady blue and red

After network is setup (system up) Blink green every second

During the upgrade firmware process Fast blink red

Enable audio Slowly blink green

Reset and restore

There is a button in the back side of the Network

Camera. It is used to reset the system or restore the

factory default settings.

RESET: Click on the button.

RESTORE:

1. Press on the button continuously.

2. Wait for all LED blink fast.

3. Free the button.

Restoring the factory defaults will erase any previous settings.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 90 91

Pas de commentaire

Vivotek TC5633 Guide d'installation Page 62