Vivotek SD7323 Spécifications télécharger pdf (Page 7)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 7

Installation

Hardware Installation

1� Attach the alignment sticker to the wall�

2� Drill four pilot holes into the wall�

3� Attach the black cover to the Network Camera using the four supplied black screws�

4� Stick the two pieces of supplied silica gel symmetrically to the inner side of the dome cover�

Then place the metal ring into the dome cover to x the silica gel.

5� Fix the dome cover to the Network Camera and secure it by rotating it clockwise�

6� Loosen the three screws on the front opening of the wall mount bracket�

7� Place the O-ring on the front opening of the wall mount bracket�

8� Feed the cables through the front opening of the wall mount bracket and pull them from wall

outlet�

9� Attach the Network Camera to the wall mount bracket by tightening the three screws on the

front opening of the wall mount bracket�

10� Fasten the wall mount bracket to the wall�

Silica gel

1 2 3 4 5 6 7 8 9 10 11 12 ... 150 151

Pas de commentaire

Vivotek SD7323 Spécifications Page 7