Vivotek VS8102 Manuel d'utilisateur télécharger pdf (Page 61)

VIVOTEK

User's Manual - 61

Camera Tampering Detection

This section explains how to set up camera temper detection. With tamper detection, the

camera is capable of detecting incidents such as redirection, blocking or defocusing, or even

spray paint.

Please follow the steps below to set up the camera tamper detection function:

1. Check Enable camera tampering detection.

2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the

tampering factor (the difference between current frame and pre-saved background) exceeds the trigger

threshold.

3. Set up the event source as Camera Tampering Detection on Application page > Event Settings /

Server Settings (how to send alarm message) / Media Settings (send what type of alarm

message). Please refer to page 79 for detailed information.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 135 136

Pas de commentaire

Vivotek VS8102 Manuel d'utilisateur Page 61