Vivotek PZ7152 Spécifications télécharger pdf (Page 31)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 31

PPPoE (Point-to-point over Ethernet)

Select this option to conﬁ gure your Network Camera to make it accessible from anywhere as

long as there is an Internet connection. Note that to utilize this feature, it requires an account

provided by your ISP

Follow the steps below to acquire your Network Camera’s public IP address.

1. Set up the Network Camera in a LAN.

2. Go to Conﬁ guration > Application > Server Settings (please refer to Server Settings on page 55) to

add a new server -- email or FTP server.

3. Go to Conﬁ guration > Application > Media Settings (please refer to Media Settings on page 53). Select

System log so that you will receive a list of system log in TXT ﬁ le format which contains the Network

Camera’s public IP address in your email or on the FTP server.

4. Go to Conﬁ guration > Network > Network Type. Select PPPoE and enter the user name and password

provided by your ISP. Click Save to take effect.

5. The Network Camera starts to reboot.

6. Disconnect the power source of the Network Camera; remove it from the LAN environment to the

Internet.

NOTE

► If the default ports are already used by other device connecting to the same router,

the Network Camera will select other ports for the Network Camera.

► If UPnP

is not supported by your router, you will see the following message.

► Steps to enable UPnP

user interface on your computer:

Note that you must log on to the computer as a system administrator to install the UPnP

components.

1. Go to Start, click Control Panel, and then click Add or Remove Programs.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 98 99

Pas de commentaire

Vivotek PZ7152 Spécifications Page 31